Manufacture of a prototype for the measurement of thermal properties based on the photoacoustic effect

Authors

  • David Gasca-Figueroa Engineering of the Technological Institute of Celaya, Av. Tecnológico S / N, Col. Fovissste, 38010 Celaya, Guanajuato, Mexico. https://orcid.org/0000-0002-8113-7935
  • Micael Gerardo Bravo-Sánchez Department of Biochemical Engineering, Technological Institute of Celaya. Av. Tecnológico S / N, Col. Fovissste, 38010 Celaya, Guanajuato, Mexico. https://orcid.org/0000-0003-3083-4172
  • Francisco Javier García-Rodríguez Department of Industrial Engineering, Technological Institute of Celaya. Av. Antonio García Cubas 1200, Col. Fovissste, 38010 Celaya, Guanajuato, Mexico. Division of Postgraduate Studies, Faculty of Engineering, Autonomous University of Queretaro. Cerro de Las Campanas, s / n, University Center, 76010 Querétaro, Querétaro. https://orcid.org/0000-0001-5342-9052
  • Marco Antonio Estrada-Álvarez Department of Mechatronic Engineering. Technological Institute of Celaya. Av. Tecnológico S / N, Col. Fovissste, 38010 Celaya, Guanajuato, Mexico.
  • José Guadalupe Zavala-Villalpando Department of Mechatronic Engineering. Technological Institute of Celaya. Av. Tecnológico S / N, Col. Fovissste, 38010 Celaya, Guanajuato, Mexico. https://orcid.org/0000-0003-1834-0997

DOI:

https://doi.org/10.37636/recit.v114453

Keywords:

Photoacoustic Effect, Optical Properties, Thermal properties, Photoacoustic Cell, Model of Rosencwaig and Gersho.

Abstract

The physical phenomenon derived of the photoacoustic effect are employed in the determination of thermal properties. In the present work, a review of the phenomenon, its development, applications and ways of improving the photoacoustic signal is carried out. An experimental setup of photoacoustic signal is built and instrumented it works with variable and constant frequency. First, the design, G-code and fabrication of the optic table is realized in a 3 axes CNC; then, the experimental setup communication is established through the LabView software. Finally, probes were developed, the obtained results are consistent with the reported in the literature. The obtained prototype was compact and practice. It is possible, due to the elimination of the opto-mechanical components used in traditional systems.

Downloads

Download data is not yet available.

References

E. J. G. Albarracín and D. G. P. de Lema, "Impact of innovation on the performance of msmes: An empirical study conducted in Colombia," Estud. Gerenciales, vol. 28, no. 122, pp. 11-27, 2012. https://doi.org/10.1016/S0123-5923(12)70191-2. DOI: https://doi.org/10.1016/S0123-5923(12)70191-2

E. Arellano. "Revisión Bibliométrica sobre Administración Estratégica y Estrategia en base de datos Scopus Bibliometrics on strategic management and strategy in Scopus database", 2015. https://doi.org/10.13140/RG.2.1.2367.7200. 2015.

D. J. Teece, "Dynamic capabilities: a guide for managers," Ivey Bus. J., vol. 75, no. 2, pp. 29-33, 2011. https://notts.rl.talis.com/items/DE49C8C1-9E2B-9FE3-3D11-CA77094F47B5.html.

M. de L. Álvarez Medina, "Competencias centrales y ventaja competitiva: el concepto, su evolución y su aplicabilidad," Contaduría y Adm., vol. 1, no. 209, pp. 5-22, 2003. https://www.redalyc.org/articulo.oa?id=39520902.

H. Chesbrough, "Business Model Innovation: Opportunities and Barriers," Long Range Plann., vol. 43, no. 2, pp. 354-363, 2010. https://doi.org/10.1016/j.lrp.2009.07.010. DOI: https://doi.org/10.1016/j.lrp.2009.07.010

D. J. Teece, "Business Models, Business Strategy and Innovation," Long Range Plann., vol. 43, no. 2, pp. 172-194, 2010. https://doi.org/10.1016/j.lrp.2009.07.003. DOI: https://doi.org/10.1016/j.lrp.2009.07.003

M. Delgado Fernández and F. Castro Díaz Balart, "Innovación tecnológica, estrategia corporativa y competitividad en la industria cubana," Dir. y Organ. Rev. Dir. Organ. y Adm. Empres., vol. 0, no. 22, pp. 14-27, 1999. https://dialnet.unirioja.es/servlet/articulo?codigo=169902.

M. A. Morales-González and J. L. Pech-Várguez, "Competitividad y estrategia: el enfoque de las competencias esenciales y el enfoque basado en los recursos," Rev. Contaduria y Adm., no. 197, pp. 47-63, 2000. https://www.biblioteca.org.ar/libros/91537.pdf.

R. Casadesus-Masanell and F. Zhu, "Strategies to Fight Ad-Sponsored Rivals," Manage. Sci., vol. 56, no. 9, pp. 1484-1499, Jul. 2010. https://doi.org/10.1287/mnsc.1100.1199. DOI: https://doi.org/10.1287/mnsc.1100.1199

M. Ferreira, F. Serra, A. Torres, and M. Torres, Administração Estratégica. Elsevier Brasil, 2014. http://redeetec.mec.gov.br/images/stories/pdf/proeja/administracao_estrat.pdf

M. P. Nunes and F. K. Steinbruch, "Internationalization and the need of business model innovation - A theoretical approach," Brazilian Bus. Rev., vol. 16, no. 3, pp. 207-221, 2019. https://doi.org/10.15728/bbr.2019.16.3.1 DOI: https://doi.org/10.15728/bbr.2019.16.3.1

M. Díaz Pérez, Y. de Liz Contreras, and S. Rivero Amador, "El factor humano como elemento dinamizador del proceso empresarial en la gestión de la información y conocimiento," Acimed, vol. 20, no. 5, pp. 42-55, 2009.

http://scielo.sld.cu/scielo.php?script=sci_arttext&pid=S1024-94352009001100004&lng=es&tlng=es.

S. Iammarino, M. Piva, M. Vivarelli, and N. Von Tunzelmann, "Technological Capabilities and Patterns of Innovative Cooperation of Firms in the UK Regions," Reg. Stud., vol. 46, no. 10, pp. 1283-1301, Nov. 2012. https://doi.org/10.1080/00343404.2012.679259. DOI: https://doi.org/10.1080/00343404.2012.679259

M. G. Zoia, L. Barbieri, F. Cortelezzi, and G. Marseguerra, "The determinants of Italian firms' technological competencies and capabilities," Eurasian Bus. Rev., vol. 8, no. 4, pp. 453-476, 2018. https://doi.org/10.1007/s40821-018-0103-2. DOI: https://doi.org/10.1007/s40821-018-0103-2

A. Pourhasan Harandi. "The effect of Information technology systems on productivity in Electronic Company of Sistan and Baluchestan Province, Iran", (unpublished Dissertation of M.A. of Management, Economics Collage), University of Sistan and Baluchestan, Iran. 2012. https://www.ijmae.com/index.php?mod=journalman&act=18&pid=448

F. Mousavifard, M. Kazemi, and A. Ayoubi, "Employees' Productivity and Automated Information System in Telecommunication Organization in Iran," Int. J. Manag. Account. Econ., vol. 3, no. 3, 2016. https://www.civilica.com/Paper-JR_IJMAE-JR_IJMAE-3-3_003.html.

H. Zhou, R. Dekker, and A. Kleinknecht, "Flexible labor and innovation performance: evidence from longitudinal firm-level data," Ind. Corp. Chang., vol. 20, no. 3, pp. 941-968, Apr. 2011. https://doi.org/10.1093/icc/dtr013 DOI: https://doi.org/10.1093/icc/dtr013

T. Wang and C. D. Zatzick, "Human Capital Acquisition and Organizational Innovation: A Temporal Perspective," Acad. Manag. J., vol. 62, no. 1, pp. 99-116, Mar. 2018. https://doi.org/10.5465/amj.2017.0114. DOI: https://doi.org/10.5465/amj.2017.0114

K. Lee and J. Yoo, "How does open innovation lead competitive advantage? A dynamic capability view perspective," PLoS One, vol. 14, no. 11, p. e0223405, Nov. 2019. https://doi.org/10.1371/journal.pone.0223405 DOI: https://doi.org/10.1371/journal.pone.0223405

C. Caldwell and V. Anderson, Competitive Advantage: Strategies, Management and Performance, 1st ed. Nova Science Publishers, Incorporated, 2017. https://novapublishers.com/shop/competitive-advantage-strategies-management-and-performance/

B. Escrig-Tena, J. C. Bou-Llusar, V. Roca-Puig, and L. Beltrán-Martín, "Does quality management drive labour flexibility?," Total Qual. Manag. Bus. Excell., vol. 23, no. 2, pp. 159-176, 2012. https://doi.org/10.1080/14783363.2012.647845 DOI: https://doi.org/10.1080/14783363.2012.647845

P. T. Preenen, R. Vergeer, K. Kraan, y S. Dhondt, "Labour productivity and innovation performance: The importance of internal labour flexibility practices," Econ. lnd. Democr., p. 0143831X15572836-, 2015. https://doi.org/10.1177/0143831X15572836. DOI: https://doi.org/10.1177/0143831X15572836

T. Melton, "The Benefits of Lean Manufacturing: What Lean Thinking has to Offer the Process Industries," Chem. Eng. Res. Des., vol. 83, no. 6, pp. 662-673, 2005. https://doi.org/10.1205/cherd.04351 DOI: https://doi.org/10.1205/cherd.04351

G. Thomas and M. Thomas, "Lean Thinking," Construction Partnering & Integrated Teamworking. pp. 159-163, 01-Aug-2005. https://doi.org/10.1002/9780470759660 DOI: https://doi.org/10.1002/9780470759660

Experimental setup of the photoacoustic system. Experimental setup of the photoacoustic system. Montaje experimental del sistema fotoacústico

Published

2018-09-26

How to Cite

Gasca-Figueroa, D., Bravo-Sánchez, M. G., García-Rodríguez, F. J., Estrada-Álvarez, M. A., & Zavala-Villalpando, J. G. (2018). Manufacture of a prototype for the measurement of thermal properties based on the photoacoustic effect. Revista De Ciencias Tecnológicas, 1(1), 44–53. https://doi.org/10.37636/recit.v114453

Most read articles by the same author(s)