Una Revisión comparativa de la capacidad de absorción de energía mecánica de estructuras tubulares compuestas
DOI:
https://doi.org/10.37636/recit.v7n1e343Palabras clave:
Configuraciones de laminado, Orientación de la fibra, Materiales compuestos, Comparación de datos, Normativas, EstándaresResumen
En esta investigación se presenta el análisis y comparación de los resultados reportados en la literatura de 1987 al 2023 relacionados con la capacidad de absorción de energía específica de columnas tubulares de materiales compuestos, los cuales se clasificaron en tres categorías: a) laminados con fibras en orientación de [0,90], b) laminados con fibras unidireccionales, y 3) laminados con laminados multidireccionales. Se examinó la absorción de energía específica (SEA) y se realizaron comparaciones entre los estudios. Los resultados exhibieron una amplia dispersión en los datos, incluso para configuraciones aparentemente similares. Las diferencias se atribuyen a factores como dimensiones de probetas, materiales utilizados y técnicas de ensayo. Además, se observó la falta de normativas estandarizadas, lo que dificulta la comparación y la identificación de patrones consistentes. Se concluye que la implementación de estándares unificados mejoraría la coherencia y comparabilidad de los resultados, proporcionando una comprensión más profunda de estos materiales en aplicaciones futuras.
Descargas
Citas
G. C. Jacob, J. F. Fellers, S. Simunovic, and J. M. Starbuck, “Energy Absorption in Polymer Composites for Automotive Crashworthiness,” J Compos Mater, vol. 36, no. 7, pp. 813–850, Apr. 2002, doi: 10.1177/0021998302036007164. DOI: https://doi.org/10.1177/0021998302036007164
D. Escudero López, “Composite materlals. Applications,” Informes de la Construcción, vol. 52, no. 472, Apr. 2001, doi: 10.3989/ic.2001.v52.i472.676. DOI: https://doi.org/10.3989/ic.2001.v52.i472.676
C. Edil da Costa, F. Velasco López, and J. M. Torralba Castelló, “Materiales compuestos de matriz metálica. I parte. Tipos, propiedades, aplicaciones,” Revista de Metalurgia, vol. 36, no. 3, pp. 179–192, Jun. 2000, doi: 10.3989/revmetalm.2000.v36.i3.570. DOI: https://doi.org/10.3989/revmetalm.2000.v36.i3.570
D. Hill, Materiales compuestos, Reverté. Barcelona, 1987.
J. G. Paredes Salinas, C. F. Pérez Salinas, and C. B. Castro Miniguano, “Análisis de las propiedades mecánicas del compuesto de matriz poliéster reforzado con fibra de vidrio 375 y cabuya aplicada a la industria automotriz,” Enfoque UTE, vol. 8, no. 3, pp. 1–15, Jun. 2017, doi: 10.29019/enfoqueute.v8n3.163. DOI: https://doi.org/10.29019/enfoqueute.v8n3.163
W. Aperador, A. Delgado, and J. H. Bautista- Ruiz, “Influencia de las fibras de carbono y fibras de vidrio en materiales compuestos como modelo en la implementación de pisos industriales.,” Respuestas, vol. 15, no. 2, pp. 63–69, Feb. 2016, doi: 10.22463/0122820X.398. DOI: https://doi.org/10.22463/0122820X.398
J. Faus Ferrer and M. Marquina Contreras, “Materiales compuestos de matriz polimérica reforzados con fibra de vidrio y fibra de carbono para aplicaciones estructurales,” Dec. 2013, Accessed: Dec. 02, 2023. [Online]. Available: https://riunet.upv.es:443/handle/10251/34276
D. K. Rajak, P. H. Wagh, and E. Linul, “Manufacturing Technologies of Carbon/Glass Fiber-Reinforced Polymer Composites and Their Properties: A Review,” Polymers (Basel), vol. 13, no. 21, p. 3721, Oct. 2021, doi: 10.3390/polym13213721. DOI: https://doi.org/10.3390/polym13213721
S. Palanivelu et al., “Comparison of the crushing performance of hollow and foam-filled small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures,” Compos B Eng, vol. 41, no. 6, pp. 434–445, Sep. 2010, doi: 10.1016/j.compositesb.2010.05.009. DOI: https://doi.org/10.1016/j.compositesb.2010.05.009
H. Ahmad, A. A. Markina, M. V Porotnikov, and F. Ahmad, “A review of carbon fiber materials in automotive industry,” IOP Conf Ser Mater Sci Eng, vol. 971, no. 3, p. 032011, Nov. 2020, doi: 10.1088/1757-899X/971/3/032011. DOI: https://doi.org/10.1088/1757-899X/971/3/032011
T. P. Hovorun, K. V. Berladir, V. I. Pererva, S. G. Rudenko, and A. I. Martynov, “Modern materials for automotive industry,” Journal of Engineering Sciences, vol. 4, no. 2, pp. f8–f18, 2017, doi: 10.21272/jes.2017.4(2).f8. DOI: https://doi.org/10.21272/jes.2017.4(2).f8
P. D. Mangalgiri, “Composite materials for aerospace applications,” Bulletin of Materials Science, vol. 22, no. 3, pp. 657–664, May 1999, doi: 10.1007/BF02749982. DOI: https://doi.org/10.1007/BF02749982
D. W. Schmueser and L. E. Wickliffe, “Impact Energy Absorption of Continuous Fiber Composite Tubes,” J Eng Mater Technol, vol. 109, no. 1, pp. 72–77, Jan. 1987, doi: 10.1115/1.3225937. DOI: https://doi.org/10.1115/1.3225937
L. S. ARIAS MAYA and L. VANEGAS USECHE, “MATERIALES COMPUESTOS INTELIGENTES,” Scientia et Technica, vol. 2, no. 25, Aug. 2004, Accessed: Dec. 03, 2023. [Online]. Available: https://revistas.utp.edu.co/index.php/revistaciencia/article/view/7225 SP -
C. W. Isaac and C. Ezekwem, “A review of the crashworthiness performance of energy absorbing composite structure within the context of materials, manufacturing and maintenance for sustainability,” Composite Structures, vol. 257. Elsevier Ltd, Feb. 01, 2021. doi: 10.1016/j.compstruct.2020.113081. DOI: https://doi.org/10.1016/j.compstruct.2020.113081
G. Zhu, J. Liao, G. Sun, and Q. Li, “Comparative study on metal/CFRP hybrid structures under static and dynamic loading,” Int J Impact Eng, vol. 141, Jul. 2020, doi: 10.1016/j.ijimpeng.2020.103509. DOI: https://doi.org/10.1016/j.ijimpeng.2020.103509
G. Sun, H. Yu, Z. Wang, Z. Xiao, and Q. Li, “Energy absorption mechanics and design optimization of CFRP/aluminium hybrid structures for transverse loading,” Int J Mech Sci, vol. 150, pp. 767–783, Jan. 2019, doi: 10.1016/j.ijmecsci.2018.10.043. DOI: https://doi.org/10.1016/j.ijmecsci.2018.10.043
Z. Zhang, Q. Liu, J. Fu, and Y. Lu, “Parametric study on the crashworthiness of the Al/CFRP/GFRP hybrid tubes under quasi-static crushing,” Thin-Walled Structures, vol. 192, p. 111156, Nov. 2023, doi: 10.1016/j.tws.2023.111156. DOI: https://doi.org/10.1016/j.tws.2023.111156
G. L. Farley, “Energy Absorption of Composite Materials,” J Compos Mater, vol. 17, no. 3, pp. 267–279, May 1983, doi: 10.1177/002199838301700307. DOI: https://doi.org/10.1177/002199838301700307
J. Fu, Q. Liu, Y. Ma, and Z. Zhang, “A comparative study on energy absorption of flat sides and corner elements in CFRP square tube under axial compression,” Thin-Walled Structures, vol. 166, Sep. 2021, doi: 10.1016/j.tws.2021.108080. DOI: https://doi.org/10.1016/j.tws.2021.108080
A. Meidell, “Computer aided material selection for circular tubes designed to resist axial crushing,” Thin-Walled Structures, vol. 47, no. 8–9, pp. 962–969, Aug. 2009, doi: 10.1016/j.tws.2009.02.003. DOI: https://doi.org/10.1016/j.tws.2009.02.003
E. Mahdi, A. M. S. Hamouda, B. B. Sahari, and Y. A. Khalid, “Effect of residual stresses in a filament wound laminated conical shell,” in Journal of Materials Processing Technology, Jul. 2003, pp. 291–296. doi: 10.1016/S0924-0136(03)00087-6. DOI: https://doi.org/10.1016/S0924-0136(03)00087-6
Z. Song, S. Ming, T. Li, K. Du, C. Zhou, and B. Wang, “Improving the energy absorption capacity of square CFRP tubes with cutout by introducing chamfer,” Int J Mech Sci, vol. 189, Jan. 2021, doi: 10.1016/j.ijmecsci.2020.105994. DOI: https://doi.org/10.1016/j.ijmecsci.2020.105994
S. Ramakrishna, “Microstructural design of composite materials for crashworthy structural applications,” Mater Des, vol. 18, no. 3, pp. 167–173, Oct. 1997, doi: 10.1016/S0261-3069(97)00098-8. DOI: https://doi.org/10.1016/S0261-3069(97)00098-8
J. J. Carruthers, A. P. Kettle, and A. M. Robinson, “Energy Absorption Capability and Crashworthiness of Composite Material Structures: A Review,” Appl Mech Rev, vol. 51, no. 10, pp. 635–649, Oct. 1998, doi: 10.1115/1.3100758. DOI: https://doi.org/10.1115/1.3100758
Y. Wang, J. Feng, J. Wu, and D. Hu, “Effects of fiber orientation and wall thickness on energy absorption characteristics of carbon-reinforced composite tubes under different loading conditions,” Compos Struct, vol. 153, pp. 356–368, Oct. 2016, doi: 10.1016/j.compstruct.2016.06.033. DOI: https://doi.org/10.1016/j.compstruct.2016.06.033
S. M. Hosseini and M. Shariati, “Experimental analysis of energy absorption capability of thin-walled composite cylindrical shells by quasi-static axial crushing test,” Thin-Walled Structures, vol. 125, pp. 259–268, Apr. 2018, doi: 10.1016/j.tws.2018.01.026. DOI: https://doi.org/10.1016/j.tws.2018.01.026
D. Hu, C. Zhang, X. Ma, and B. Song, “Effect of fiber orientation on energy absorption characteristics of glass cloth/epoxy composite tubes under axial quasi-static and impact crushing condition,” Compos Part A Appl Sci Manuf, vol. 90, pp. 489–501, Nov. 2016, doi: 10.1016/j.compositesa.2016.08.017. DOI: https://doi.org/10.1016/j.compositesa.2016.08.017
H.-W. Song, X.-W. Du, and G.-F. Zhao, “Energy Absorption Behavior of Double-Chamfer Triggered Glass/Epoxy Circular Tubes,” J Compos Mater, vol. 36, no. 18, pp. 2183–2198, Sep. 2002, doi: 10.1177/0021998302036018515. DOI: https://doi.org/10.1177/0021998302036018515
J. Xu, Y. Ma, Q. Zhang, T. Sugahara, Y. Yang, and H. Hamada, “Crashworthiness of carbon fiber hybrid composite tubes molded by filament winding,” Compos Struct, vol. 139, pp. 130–140, Apr. 2016, doi: 10.1016/j.compstruct.2015.11.053. DOI: https://doi.org/10.1016/j.compstruct.2015.11.053
R. Jafari Nedoushan, “Improvement of energy absorption of expanded metal tubular structures under compressive loads,” Thin-Walled Structures, vol. 157, Dec. 2020, doi: 10.1016/j.tws.2020.107058. DOI: https://doi.org/10.1016/j.tws.2020.107058
S. Palanivelu et al., “Experimental study on the axial crushing behaviour of pultruded composite tubes,” Polym Test, vol. 29, no. 2, pp. 224–234, Apr. 2010, doi: 10.1016/j.polymertesting.2009.11.005. DOI: https://doi.org/10.1016/j.polymertesting.2009.11.005
S. Palanivelu et al., “Comparative study of the quasi-static energy absorption of small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures,” Polym Test, vol. 29, no. 3, pp. 381–396, May 2010, doi: 10.1016/j.polymertesting.2010.01.003. DOI: https://doi.org/10.1016/j.polymertesting.2010.01.003
P. M. Weaver and M. F. Ashby, “Material limits for shape efficiency,” Prog Mater Sci, vol. 41, no. 1–2, pp. 61–128, 1997, doi: 10.1016/S0079-6425(97)00034-0. DOI: https://doi.org/10.1016/S0079-6425(97)00034-0
A. G. Mamalis, D. E. Manolakos, G. A. Demosthenous, and M. B. Ioannidis, “Analysis of failure mechanisms observed in axial collapse of thin-walled circular fibreglass composite tubes,” Thin-Walled Structures, vol. 24, no. 4, pp. 335–352, Jan. 1996, doi: 10.1016/0263-8231(95)00042-9. DOI: https://doi.org/10.1016/0263-8231(95)00042-9
S. Sulaiman, M. AlHajji, C. N. A. Jaafar, F. A. Aziz, and T. Zuhair, “Effect of composite material distribution and shape on energy absorption systems,” Advances in Materials and Processing Technologies, vol. 8, no. 1, pp. 1–10, Jan. 2022, doi: 10.1080/2374068X.2020.1793265.
S. Sulaiman, M. AlHajji, C. N. A. Jaafar, F. A. Aziz, and T. Zuhair, “Effect of composite material distribution and shape on energy absorption systems,” Advances in Materials and Processing Technologies, vol. 8, no. 1, pp. 1–10, Jan. 2022, doi: 10.1080/2374068X.2020.1793265. DOI: https://doi.org/10.1080/2374068X.2020.1793265
J. J. de la Cuesta and H. Ghasemnejad, “Improvement of Force History Pattern in Composite Tubular Structures by Developed Trigger Mechanisms,” Applied Composite Materials, vol. 29, no. 5, pp. 1771–1794, Oct. 2022, doi: 10.1007/s10443-022-10040-5. DOI: https://doi.org/10.1007/s10443-022-10040-5
T. Ran, Y. Ren, and H. Jiang, “Design and Assessments of Gradient Chamfer Trigger for Enhancing Energy-Absorption of CFRP Square Tube,” Applied Composite Materials, Oct. 2022, doi: 10.1007/s10443-022-10071-y. DOI: https://doi.org/10.1007/s10443-022-10071-y
E. Cetin, A. Baykasoğlu, M. E. Erdin, and C. Baykasoğlu, “Experimental investigation of the axial crushing behavior of aluminum/CFRP hybrid tubes with circular-hole triggering mechanism,” Thin-Walled Structures, vol. 182, p. 110321, Jan. 2023, doi: 10.1016/j.tws.2022.110321. DOI: https://doi.org/10.1016/j.tws.2022.110321
D. Wang, B. Liu, and H. Liang, “Investigation into design strategy of aluminum alloy-CFRP hybrid tube under multi-angle compression loading,” Int J Mech Sci, vol. 248, p. 108207, Jun. 2023, doi: 10.1016/j.ijmecsci.2023.108207. DOI: https://doi.org/10.1016/j.ijmecsci.2023.108207
E. F. Abdewi, S. Sulaiman, A. M. S. Hamouda, and E. Mahdi, “Quasi-static axial and lateral crushing of radial corrugated composite tubes,” Thin-Walled Structures, vol. 46, no. 3, pp. 320–332, Mar. 2008, doi: 10.1016/j.tws.2007.07.018. DOI: https://doi.org/10.1016/j.tws.2007.07.018
H. Jishi, R. Alia, and W. Cantwell, “The energy-absorbing characteristics of tubular sandwich structures,” Journal of Sandwich Structures & Materials, vol. 24, no. 1, pp. 742–762, Jan. 2022, doi: 10.1177/10996362211020457. DOI: https://doi.org/10.1177/10996362211020457
P. H. Thornton, “Energy Absorption in Composite Structures,” J Compos Mater, vol. 13, no. 3, pp. 247–262, Jul. 1979, doi: 10.1177/002199837901300308. DOI: https://doi.org/10.1177/002199837901300308
H. Yang, H. Lei, G. Lu, Z. Zhang, X. Li, and Y. Liu, “Energy absorption and failure pattern of hybrid composite tubes under quasi-static axial compression,” Compos B Eng, vol. 198, p. 108217, Oct. 2020, doi: 10.1016/j.compositesb.2020.108217. DOI: https://doi.org/10.1016/j.compositesb.2020.108217
E. Mahdi, A. M. S. Hamouda, and T. A. Sebaey, “The effect of fiber orientation on the energy absorption capability of axially crushed composite tubes,” Materials & Design (1980-2015), vol. 56, pp. 923–928, Apr. 2014, doi: 10.1016/j.matdes.2013.12.009. DOI: https://doi.org/10.1016/j.matdes.2013.12.009
Z. Cui, Q. Liu, Y. Sun, and Q. Li, “On crushing responses of filament winding CFRP/aluminum and GFRP/CFRP/aluminum hybrid structures,” Compos B Eng, vol. 200, p. 108341, Nov. 2020, doi: 10.1016/j.compositesb.2020.108341. DOI: https://doi.org/10.1016/j.compositesb.2020.108341
A. Berndt, M. Laux, H. Oberlercher, R. Heim, and F. O. Riemelmoser, “Additive manufacturing of continuous carbon fiber tubes and experimental investigation of the energy absorption capability under quasi-static loading,” Procedia Structural Integrity, vol. 34, pp. 105–110, 2021, doi: 10.1016/j.prostr.2021.12.016. DOI: https://doi.org/10.1016/j.prostr.2021.12.016
R. Jiang et al., “Energy Absorption Characteristics of a CFRP-Al Hybrid Thin-Walled Circular Tube under Axial Crushing,” Aerospace, vol. 8, no. 10, p. 279, Sep. 2021, doi: 10.3390/aerospace8100279. DOI: https://doi.org/10.3390/aerospace8100279
J.-S. Kim, H.-J. Yoon, and K.-B. Shin, “A study on crushing behaviors of composite circular tubes with different reinforcing fibers,” Int J Impact Eng, vol. 38, no. 4, pp. 198–207, Apr. 2011, doi: 10.1016/j.ijimpeng.2010.11.007. DOI: https://doi.org/10.1016/j.ijimpeng.2010.11.007
M. Mirzaei, M. Shakeri, M. Sadighi, and H. Akbarshahi, “Experimental and analytical assessment of axial crushing of circular hybrid tubes under quasi-static load,” Compos Struct, vol. 94, no. 6, pp. 1959–1966, May 2012, doi: 10.1016/j.compstruct.2012.01.003. DOI: https://doi.org/10.1016/j.compstruct.2012.01.003
Y. Yang, Y. Nishikawa, A. Nakai, U. S. Ishiaku, and H. Hamada, “Effect of Cross-Sectional Geometry on the Energy Absorption Capability of Unidirectional Carbon Fiber Reinforced Composite Tubes.,” Science and Engineering of Composite Materials, vol. 15, no. 4, Jan. 2008, doi: 10.1515/SECM.2008.15.4.249. DOI: https://doi.org/10.1515/SECM.2008.15.4.249
![Análisis de la absorción de energía en relación a la configuración de laminado [0,90]2](https://recit.uabc.mx/public/journals/1/submission_343_343_coverImage_es_ES.jpg)
Publicado
Cómo citar
Número
Sección
Categorías
Licencia
Derechos de autor 2024 María Fernanda De Jesús-Ramírez, Arturo Abúndez-Pliego, Enrique Alcudia-Zacarías, Juan Antonio Paz-González, Salomón Blanco-Figueroa
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Los autores/as que publiquen en esta revista aceptan las siguientes condiciones:
- Los autores/as conservan los derechos de autor y ceden a la revista el derecho de la primera publicación, con el trabajo registrado con la licencia de atribución de Creative Commons 4.0, que permite a terceros utilizar lo publicado siempre que mencionen la autoría del trabajo y a la primera publicación en esta revista.
- Los autores/as pueden realizar otros acuerdos contractuales independientes y adicionales para la distribución no exclusiva de la versión del artículo publicado en esta revista (p. ej., incluirlo en un repositorio institucional o publicarlo en un libro) siempre que indiquen claramente que el trabajo se publicó por primera vez en esta revista.
- Se permite y recomienda a los autores/as a compartir su trabajo en línea (por ejemplo: en repositorios institucionales o páginas web personales) antes y durante el proceso de envío del manuscrito, ya que puede conducir a intercambios productivos, a una mayor y más rápida citación del trabajo publicado (vea The Effect of Open Access).
