Urban mobility device for wheelchair users in the Metropolitan Area of the Valley of Mexico (ZMVM)
DOI:
https://doi.org/10.37636/recit.v44365387Keywords:
Disability, Wheelchairs, Electromechanical wheelchair device, Urban mobilityAbstract
People with disabilities are important sector of the population that needs to mobilize in the Metropolitan Area of the Valley of Mexico, to work, attend school or carry out daily activities. The objective of the work is to design the prototype of an independent urban mobility device, adaptable to wheelchairs for everyday use. For this, was used as a method the General Model of the Design Process of the Universidad Autónoma Metropolitana, chosen for being suitable for the design and development of products. As a result, was obtained a functional prototype 1: 1 scale, with the proposal to integrate in public transport stations.
Downloads
References
INEGI, “Presentación de resultados censo 2020 Estados Unidos Mexicanos,” México, 2020. Accessed: Jul. 31, 2021. [Online]. Available: https://www.inegi.org.mx/contenidos/programas/ccpv/2020/doc/Censo2020_Principales_resultados_ejecutiva_EUM.pdf
IMCO, “índice de movilidad urbana: barrios mejor conectados para ciudades más incluyentes,” México, Jan. 2019. Accessed: Jul. 31, 2020. [Online]. Available: https://imco.org.mx/indices/indice-de-movilidad-urbana/capitulos
M. L. Gutiérrez et al., Contra un Diseño Dependiente: un modelo para la autodeterminación nacional, Primera Edición. México: Universidad Autónoma Metropolitana-Azc. División de Ciencias y Artes para el Diseño, 1992. http://hdl.handle.net/11191/402
SEDATU, CONAPO, and INEGI, Delimitación de las zonas metropolitanas de México 2015, Primera Edición. México, 2018. [Online]. Available: https://www.gob.mx/sedatu
OECD, “OECD Territorial Reviews: Valle de México, México,” OECD, Oct. 2015. doi: 10.1787/9789264245174-en. DOI: https://doi.org/10.1787/9789264245174-en
Gobierno del Distrito Federal, “Ley de Movilidad del Distrito Federal,” Oct. 2016. Accessed: Jul. 31, 2021. [Online]. Available: http://www.paot.org.mx/centro/leyes/df/pdf/2016/LEY_MOVILIDAD_DISTRITO_FEDERAL_07_10_2016.pdf
INEGI, “La discapacidad en México, datos al 2014. Versión 2017,” México, 2017. Accessed: Sep. 10, 2021. [Online]. Available: https://www.inegi.org.mx/contenidos/productos/prod_serv/contenidos/espanol/bvinegi/productos/nueva_estruc/702825094409.pdf
SEDESOL, “Diagnóstico sobre la situación de las personas con discapacidad en México,” 2016. Accessed: Jul. 31, 2021. [Online]. Available: https://www.gob.mx/cms/uploads/attachment/file/126572/Diagn_stico_sobre_la_Situaci_n_de_las_Personas_Con_Discapacidad._Mayo_2016.pdf
F. García, La investigación tecnológica, PRIMERA. México: Limusa Noriega Editores, 2005. http://bdigital.ula.ve/storage/pdf/recitiutm/v1n2/art04.pdf
D. Naranjo, “The Impact of Bus Rapid Transit System on Land Prices in Mexico City,” 2013. Accessed: Jul. 31, 2021. [Online]. Available: http://www.jstor.org/stable/resrep18409.5
Gobierno de la Ciudad de México, Manual de Normas Técnicas de Accesibilidad. México, 2016. http://data.indepedi.cdmx.gob.mx/manual_accesibilidad.html
J. Brázdil, “The estimation of property damage caused to the company ZLKL in consequence of damage of the ELBEE vehicle prototype.,” 2012. Accessed: Jul. 08, 2021. [Online]. Available: https://theses.cz/id/lrggkc/?lang=en#panel_latex
Access Exchange International, “Brindging the Gap,” 2017. Accessed: Jul. 31, 2021. [Online]. Available: https://www.globalride-sf.org/TransportingChildren/GuideToSchool.pdf
N. G. Herguido, J. L. P. Cunill, A. B. Moreno, M. S. Macias, S. Morales-Conde, and P. P. García-Luna, “Paciente con paraplejia y obesidad mórbida; nuevo reto en la cirugía bariátrica,” Nutricion Hospitalaria, vol. 29, no. 6, pp. 1447–1449, 2014. https://doi.org/10.3305/nh.2014.29.6.7400.
M. D. R. Rivera-Barragán, “Alimentación en estudiantes con discapacidad,” Horizonte Sanitario, vol. 19, no. 3, pp. 311–323, Sep. 2020. https://doi.org/10.19136/hs.a19n3.3653. DOI: https://doi.org/10.19136/hs.a19n3.3653
M. Ortiz, “Preparación y caracterización de materiales compuestos para electrodos de baterías de litio,” 2nda Jornada de Investigación Cerámica, 2016. http://hdl.handle.net/20.500.12272/2469
D. Maneiah, D. Mishra, K. P. Rao, and K. B. Raju, “Process parameters optimization of friction stir welding for optimum tensile strength in Al 6061-T6 alloy butt welded joints,” in Materials Today: Proceedings, Jan. 2020, vol. 27, pp. 904–908. https://doi.org/10.1016/j.matpr.2020.01.215. DOI: https://doi.org/10.1016/j.matpr.2020.01.215
K. Chanyathunyaroj, S. Phetchcrai, G. Laungsopapun, and A. Rengsomboon, “Fatigue characteristics of 6061 aluminum alloy subject to 3.5% NaCl environment,” International Journal of Fatigue, vol. 133, Apr. 2020. https://doi.org/10.1016/j.ijfatigue.2019.105420. DOI: https://doi.org/10.1016/j.ijfatigue.2019.105420
E. L. Rooy, “Introduction to Aluminum and Aluminum Alloys,” in Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. Vol 2, ASM International, 1990. https://doi.org/10.31399/asm.hb.v02.a0001057. DOI: https://doi.org/10.31399/asm.hb.v02.a0001057
P. E. Hemeren, M. Johannesson, M. Lebram, and F. Eriksson, “Detecting Cyclists at Night: visibility effects of reflector placement and different lighting conditions,” 2017. [Online]. Available: http://creativecommons.org/licenses/by/4.0/.1
Published
How to Cite
License
Copyright (c) 2021 Israel Garduño-Bonilla, Emilio Martínez de Velasco y Arellano, Ana Lilia Laureano-Cruces
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors who publish in this journal accept the following conditions:
The authors retain the copyright and assign to the journal the right of the first publication, with the work registered with the Creative Commons Attribution license 4.0, which allows third parties to use what is published as long as they mention the authorship of the work and the first publication in this magazine.
Authors may make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in this journal (eg, include it in an institutional repository or publish it in a book) as long as they clearly indicate that the work it was first published in this magazine.
Authors are allowed and encouraged to share their work online (for example: in institutional repositories or personal web pages) before and during the manuscript submission process, as it can lead to productive exchanges, greater and more quick citation of published work (see The Effect of Open Access).
